using	Board::LoggerDevice = modm::IODeviceWrapper< stlink::Uart, modm::IOBuffer::BlockIfFull >

void	Board::initialize ()

void	Board::initializeUsb (uint8_t priority=3)

void	Board::initializeUsbFs (uint8_t priority=3)

using	Board::usb::Dm = GpioA11

using	Board::usb::Dp = GpioA12

using	Board::usb::UcpdFlt = GpioB14

using	Board::usb::UcpdDBn = GpioB5

using	Board::usb::UcpdCc1 = GpioA15

using	Board::usb::UcpdCc2 = GpioB15

using	Board::usb::Device = UsbFs

using	Board::stlink::Rx = GpioOutputG8

using	Board::stlink::Tx = GpioInputG7

using	Board::stlink::Uart = BufferedUart< LpuartHal1, UartTxBuffer< 2048 > >

Detailed Description

lbuild module: modm:board:nucleo-l552ze-q